Highlights:

• Drill hole Bo_RC_14/25 intersects 12.0 metres @ 4.27% WO₃ including 6.0 metres @ 8.39% WO₃ from 252.00 metres downhole, confirming one of the highest-grade tungsten intercepts reported in Western exploration, especially for high quality wolframite tungsten mineralization. This validates early visual observations and supports the presence of a controlled high-grade breccia corridor.

• Over 2,500 metres of drilling completed across nine holes, with multiple intercepts of visible wolframite and chalcopyrite. The remaining 1,600 metres of the 4,200 metre campaign now underway with a further fully funded 1,528 metres now also planned with two rigs active on site.

• Tungsten price reaches high of $545 USD/MTU, up approximately 40% in last 4 months as demand for the critical mineral increases with further supply chain restrictions from non-Western countries.

Allied Critical Metals Inc. (CSE: ACM,OTC:ACMIF) (OTCQB: ACMIF) (FSE: 0VJ0) (‘Allied’ or the ‘Company’), which is focused on its 100% owned past producing Borralha and Vila Verde tungsten projects in northern Portugal, is pleased to announce an update on its ongoing 4,200-metre Reverse Circulation (RC) drill program at the Borralha Tungsten Project. The initial phase of the campaign was launched in early June 2025 and continues to deliver strong technical progress, supporting: (i) an updated Mineral Resource Estimate (MRE), anticipated in Q4 2025; (ii) advanced metallurgical testing; and (iii) the Company’s Preliminary Economic Assessment (PEA) for a large scale processing facility located at Borralha, targeted for completion later this year. A further fully funded 1,528 metre drilling is now also planned for the fourth quarter of 2025 to build off of the successes in July.

High-grade results from drill hole Bo_RC_14/25 marks a breakthrough for the Borralha Project, with further drilling and a Preliminary Economic Assessment already underway. The results are particularly timely as tungsten price has reached a new high of $545 USD/MTU, which is an increase of approximately 40% over the past four months as demand for the critical mineral increases in the face of further supply chain restrictions from non-Western countries [Source: FastMarkets].

Roy Bonnell, CEO & Director of Allied, commented, ‘These initial assay results are a major step forward for the Borralha Project and a clear validation of our geological model. The exceptional tungsten grades intersected in Bo_RC_14/25 place Borralha among the most exciting undeveloped critical mineral assets in Europe. As we advance toward the Mineral Resource update and Preliminary Economic Assessment, these results strengthen our confidence in Borralha’s potential to become a cornerstone of Western countries’ strategic raw material supply.’

As of July 30, 2025, Allied had completed approximately 2,500 metres of drilling across nine drill holes. Drilling operations were temporarily paused during August in compliance with seasonal fire safety restrictions and successfully resumed on September 1, 2025. The program continues to advance towards its objectives, with a clear focus on three key technical priorities:

• Expanding and upgrading the existing tungsten resource in accordance with National Instrument 43-101-Standards of Disclosure for Mineral Projects (‘NI 43-101’), with emphasis on increasing tonnage and converting Inferred Resources to Indicated Resources classification; and

• Collecting representative material for metallurgical testing, to validate marketable concentrate grades at 65% WO₃.

Overview of Drilling to Date:

• Drill hole Bo_RC_14/25 confirmed the presence of high-grade tungsten mineralization, with visual observations of massive wolframite supporting the interpretation of a potentially enriched corridor within the breccia-hosted system.

• Drill hole Bo_RC_15/25 aimed to access the west deep step-out potential at the south area of the breccia. Visual inspection confirmed the presence of breccia together with evidence of wolframite. Assays of this drill hole are ongoing.

• Drill holes Bo_RC_16/25 and Bo_RC_17/25 are infill drillholes to increase the Resource resolution and knowledge of the interchange between the large bulkable medium grade central backbone of the south area of the breccia, into the medium size high-grade corridors deeper to west. As expected, breccia with visible mineralization was visible, and the pending assays results will provide proper interpretation.

• Drill holes Bo_RC_18/25 , Bo_RC_19/25 and Bo_RC_26/25 are infill drillholes at the central and lower grade area of the Breccia. Here the goal was to improve the Resource model resolution and grade at this section. Some visible mineralization was identified, but the pending assays are necessary to confirm the potential upgrade.

• Drill holes Bo_RC_21/25 and Bo_RC_22/25 are drillholes meant to step-out the previous discovery of a potential new high-grade large corridor at the Bo_RC_11/24 drill hole that has no resources due to lack of composites pairs. Both drillholes encountered continuous breccia and multiple zones with visible sulphides and polymetallic indicators, including wolframite and chalcopyrite, reinforcing the continuity and depth of the mineralized system. Pending assays will confirm if a new economical vector for considerable Resource expansion is present at the north deep area of the breccia.

Table 1 – Collar locations

Figure 1 – Drill collar plan showing planned holes for the ongoing 5,728 m RC campaign at the Borralha Project. The red outline delineates the main mineralized breccia zone.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11632/265023_a4b3ded4f486c9d6_001full.jpg

All samples from the nine completed drill holes have been dispatched to ALS Laboratories in Seville for geochemical analysis, with initial assay results now beginning to return. The first results received from hole Bo_RC_14/25 confirm the presence of tungsten mineralization, consistent with earlier visual observations. Additional assay results from the remaining holes are expected over the coming weeks.

Building on Visual Confidence with Excellent Drill Results

The early stages of the 2025 RC drill campaign at Borralha Project were marked by highly encouraging visual intercepts across several holes. With the arrival of the first assays, that confidence has now been materially validated. Initial data confirms not only the continuity of breccia-hosted mineralization but also suggests that the Borralha Project hosts very high-grade tungsten intercepts as described below.

The results from the Bo_RC_14/25 drill hole represents a major technical milestone for Allied. The grade and length of the intercept reinforce the Company’s position that the Borralha Project is one of Europe’s most strategically important undeveloped tungsten assets. These assays will feed directly into the upcoming Mineral Resource Estimate (MRE) and Pre-Economic Assessment (PEA), both of which are expected to underpin Allied’s near-term development plans.

Assay Highlights from Bo_RC_14/25 include, from 252.00m downhole:

• 12.0 m @ 4.27% WO₃*, including

• 6.0 m @ 8.39% WO₃*

*WO₃ Tungsten trioxide % converted from W ppm multiplied by 1.2611 stoichiometric factor. W ppm results are from ALS Laboratories analytical method ME-MS81. For the ME-MS81 above detection limit of >10,000 ppm assays, ME-XRF15c is used.

A geological cross section for hole Bo_RC_14/25 is presented below, illustrating the location of the high-grade intercept within the broader breccia-hosted mineralized zone. The section highlights the continuity of the tungsten-bearing structures, the correlation with visual observations, and the potential for further extensions at depth and along strike.

Figure 2 – Geological Cross-Section for hole Bo_RC_14/25.

To view an enhanced version of this graphic, please visit:
https://images.newsfilecorp.com/files/11632/265023_a4b3ded4f486c9d6_002full.jpg

Technical Information and Quality Control / Quality Assurance

Drillholes were all conducted with RC diamond bit drilling. All sample bags were pre-marked prior to drilling. They were each identified with an internal sequence number used as a sample identifier, both the sample for analysis and its reject samples. Each analytical sample bag is filled with a portion of 2 m length of drilled rock and each reject sample bag will take another representative portion of 1 m length of drilled rock. Thus, each two reject samples will be the equivalent to one assay sample. The splitting is done as part of the drilling process using a rotary splitter.

The analytical samples were collected directly from the rig splitter according to a sampling list that documented the metres and sampling sequence for each drill hole. This list also identified which sample should be collected in duplicate as well as which certified reference material (‘CRM’) were to be placed in the numerical sequence. The CRMs were randomly inserted at every 20 samples (5%), and duplicate samples were collected every 20 samples (5%). Thus, there’s an alternating CRM and Duplicate every 10th sample.

The analytical and reject samples are then transported in boxes from the drilling site to the core shed by a designated employee. The analytical samples were stored on labelled palettes for later direct shipping to the ALS preparation laboratories in Seville, Spain. Later, the pulp and reject samples were securely stored in the logging room on the property.

To the best of the Company’s knowledge, no drilling, sampling, recovery, or other factors exist that would materially compromise the accuracy or reliability of the referenced data

RC samples were prepared by ALS preparation laboratory in Seville, Spain, crushing the sample with up to 70% of the material passing a 2 mm screen, and then each sample was split to 250 g and pulverized with hardened steel to 85% passing a 75 μm screen. Each resultant sub-sample was then direct shipped to their certified assay laboratory Dublin Road, Loughrea, Co., Ireland.

The samples are analyzed by the ME-MS81 ALS method that applies a lithium borate fusion to the sample and the result of this fusion is measured by applying an ICP-MS. It is also applied to the ALS ME-4ACD81 procedure which reports base metals by a 4-acid digestion and later analyzed by an ICP-MS procedure. Any over-limit tungsten values were re-analysed at the same laboratory by a W-XRF15b procedure that uses a lithium borate fusion with an XRF analysis. The analytical results were then securely emailed to the Company.

Qualified Person’s Statement and Data Verification

The scientific and technical information in this news release has been reviewed and approved by Mr. Vítor Arezes, BSc, MIMMM (QMR), Vice-President Exploration of Allied Critical Metals, who is a Qualified Person for the purposes of National Instrument 43-101 – Standards of Disclosure for Mineral Projects. Mr. Arezes is not independent of Allied Critical Metals as he is an officer of the Company.

The Qualified Person has verified the data disclosed herein by reviewing core logs and drill records, validating collar and downhole survey data, assessing database integrity, reviewing assay QA/QC (CRMs, blanks, and duplicates), and reconciling reported intervals to the original laboratory certificates. The verification did not identify any factors that would materially affect the accuracy or reliability of the information presented.

Project Momentum and Strategic Positioning

The drill program is a cornerstone of Allied’s strategy to position Borralha as Europe’s leading high-grade tungsten development, combining grade, scale, and near-term production potential in a secure EU jurisdiction. With tungsten designated as a Critical and Strategic Raw Material by both the European Union and the United States, Borralha directly addresses Western supply vulnerabilities at a time of rising global demand and constrained Chinese exports. As one of the only advanced-stage tungsten assets in Western Europe, Borralha is uniquely placed to support defense readiness, AI, EVs, and the EU’s Critical Raw Materials Act objectives for domestic sourcing.

This campaign also supports Allied’s permitting and development milestones, including the submission of additional technical information in response to follow-up questions from the Environmental Impact Assessment (EIA) evaluation committee–a standard step in the review process. The Company expects to deliver its formal response by third quarter of 2025, with a final decision anticipated in fourth quarter of 2025 or early first quarter of 2026.

Next Steps

Allied is now preparing to complete the final 1,600 metres of drilling to reach the planned total of 4,200 metres for the current Phase 1 campaign. The remaining holes, including Bo_RC_20/25, Bo_RC_23/25, and Bo_RC_24/25 and Bo_RC_25/25, have been selected based on strong visual intercepts, structural continuity, and geological insights from previously completed drilling. Minor adjustments to the drill plan are being implemented to maximize coverage of key mineralized corridors while maintaining program efficiency. In addition, a further 1,528 metres drilling is now also planned for the fourth quarter of 2025 to build off of the successes in July.

Following a scheduled pause in August due to the regional fire season, drilling resumed on September 1 with two rigs operating simultaneously. The campaign has quickly regained momentum and remains on track to complete the targeted meterage within the planned timeframe. Field operations continue to run efficiently, positioning Allied to generate the technical data required for the upcoming Mineral Resource Estimate (MRE) update and Preliminary Economic Assessment (PEA).

New Advisory Role; Other Corporate 

The Company is announcing that Colin Padget has resigned his position as director effective September 1, 2025, but is being retained as an advisor to the Company going forward. The Company wishes to thank Colin for his contributions and looks forward to his continued involvement as an advisor to the Company.

In addition, the Company prematurely announced the grant of stock options (Options) and restricted share units (RSUs) in its news release dated September 2, 2025. In light of the drill results in this press release, the Company is postponing the grant to a future date.

ON BEHALF OF THE BOARD OF DIRECTORS,

‘Roy Bonnell’

Roy Bonnell
CEO and Director

About Tungsten

It is critical to understand the difference between wolframite mineralization of tungsten and scheelite mineralization of tungsten. Scheelite often reports higher grades (0.3%-1.0% WO₃) but is more costly and complex to process, requiring flotation methods with higher capital and operating expenditures and lower recoveries.ⁱ In contrast, wolframite, which is the focus of Allied Critical Metals can be processed more efficiently using gravity and magnetic separation, resulting in lower costs and higher recoveries, making lower grades (~0.15%-0.25% WO₃) economically viable in wolframite deposits.ⁱⁱ For example, a wolframite deposit with 0.4% WO₃ over 3 metres can be more profitable than a scheelite deposit with 0.7% WO₃ over the same interval due to lower processing costs and higher recovery rates.ⁱⁱⁱ

In Western exploration drilling, scheelite tungsten grades typically range from 0.3% to 1.0% WO₃.^iv The cut-off grade for economic viability is generally around 0.1% WO₃, with highly efficient operations able to mine at grades as low as 0.08% WO₃.^v Skarn deposits, a common deposit type, typically range from 0.34% to 1.4% WO₃, with intercepts of 0.4% WO₃ over 1-5 metres considered very good and 0.7% WO₃ over 1-3 metres considered very high-grade.^vi Intercept lengths can range from 0.6 metres to over 100 metres, with longer intercepts at strong grades generally preferred for economic mining. For example, two leading western tungsten mines demonstrate the standards for scheelite with results like 9.5 m @ 0.76% WO₃ and 14.1 m @ 0.58% WO₃^vii at the Sangdong Mine* in South Korea and 18 m @ 1.00% WO₃ reported at the Mt. Carbine Tungsten Project* in Australia.^viii

In contrast, the Panasqueira Mine* in Portugal typically reports 1-5 m @ 0.25-0.5% WO₃ as a wolframite deposit^ix A result like 0.5% WO₃ over 3 metres is considered typical and strong within Western tungsten exploration standards, especially for wolframite tungsten mineralization.^x

To understand tungsten, it is also important to recognize that China, Russia, and North Korea control approximately 87% of the world’s tungsten supply, using cheap labour and minimal environmental standards in authoritarian regimes.^xi As a result, production costs and grades in these countries are not comparable to Western projects, which operate under higher labour, ESG, and energy cost structures.^xii Evaluating projects outside these regions provides a realistic benchmark for what grades and intercepts are economically viable while supporting secure, NATO-aligned supply chains.^xiii

For Allied, this context is significant, as the Company’s grades, ranging from 0.2% to 1.0% WO₃, are considerable against global wolframite benchmarks, with intercepts that meet or exceed typical Western results.^xiv The Company’s focus on wolframite will correspond to lower processing costs and higher recoveries, supporting project economics even at lower grades.^xv Allied’s operations in secure jurisdictions align with Western critical mineral needs, avoiding geopolitical risks associated with China and Russia while positioning the Company to benefit from growing tungsten demand across defense, aerospace, and electrification sectors.^xvi Allied’s strong grades, low-cost processing advantages, and secure location position it as a strategic and responsible tungsten exploration company, well placed to support robust project economics in a rising-demand market.^xvii

*The results cited for the Sangdong Mine, the Panasqueira Mine and the Mt. Carbine Tungsten Project are based on public disclosures and are presented for industry benchmarking and comparison purposes only. Allied has no interests in those mineral projects.

About Allied Critical Metals Inc.

Allied Critical Metals Inc. (CSE: ACM,OTC:ACMIF) (OTCQB: ACMIF) (FSE: 0VJ0) is a Canadian-based mining company focused on the expansion and revitalization of its 100% owned past producing Borralha Tungsten Project and the Vila Verde Tungsten Project in northern Portugal with advantageous wolframite tungsten mineralization. Tungsten has been designated a critical metal by the United States and other western countries, as they are aggressively seeking friendly sources of this unique metal. Currently, China, Russia and North Korea represent approximately 86% of the total global supply and reserves. Tungsten is used in a variety of industries such as defense, automotive, manufacturing, electronics, and energy.

Please visit our website at www.alliedcritical.com.

Also visit us at:
LinkedIn: https://www.linkedin.com/company/allied-critical-metals-inc
X: https://x.com/@alliedcritical/
Instagram: https://www.instagram.com/alliedcriticalmetals/

The Canadian Stock Exchange does not accept responsibility for the adequacy or accuracy of this release.

Cautionary Statement Regarding Forward-Looking Information

This news release contains ‘forward-looking statements’, including with respect to the use of proceeds. Wherever possible, words such as ‘may’, ‘would’, ‘could’, ‘should’, ‘will’, ‘anticipate’, ‘believe’, ‘plan’, ‘expect’, ‘intend’, ‘estimate’, ‘potential for’ and similar expressions have been used to identify these forward-looking statements. These forward-looking statements reflect the current expectations of the Company’s management for future growth, results of operations, performance and business prospects and opportunities and involve significant known and unknown risks, uncertainties and assumptions, including, without limitation, those listed in the Company’s Listing Statement and other filings made by the Company with the Canadian securities regulatory authorities (which may be viewed under the Company’s profile at www.sedarplus.ca ). Examples of forward-looking statements in this news release include, but are not limited to, statements regarding the proposed timeline and use of proceeds for exploration and development of the Company’s mineral projects as described in the Company’s Listing Statement, news releases, and corporate presentations. Should one or more of these risks or uncertainties materialize or should assumptions underlying the forward-looking statements prove incorrect, actual results, performance or achievements may vary materially from those expressed or implied by the forward-looking statements contained in this news release. These factors should be considered carefully, and prospective investors should not place undue reliance on the forward-looking statements. This list is not exhaustive of the factors that may affect any of the Company’s forward-looking statements and reference should also be made to the Company’s Listing Statement dated April 23, 2025 and news release dated May 16, 2025, and the documents incorporated by reference therein, filed under its SEDAR+ profile at www.sedarplus.ca for a description of additional risk factors. The Company disclaims any intention or obligation to revise forward-looking statements whether as a result of new information, future developments or otherwise, except as required by law.

ⁱ International Tungsten Industry Association (ITIA). (2023). Tungsten: Global industry, markets & outlook. Retrieved from https://www.itia.info

ⁱⁱ Almonty Industries Inc. (2023a). Investor presentations. Retrieved from https://almonty.com/investors/#presentations

ⁱⁱⁱ International Tungsten Industry Association (ITIA). (2023). Tungsten: Global industry, markets & outlook. Retrieved from https://www.itia.info

^iv US Geological Survey (USGS). (2024). Mineral commodity summaries: Tungsten. Retrieved from https://pubs.usgs.gov/periodicals/mcs2024/mcs2024-tungsten.pdf

^v Almonty Industries Inc. (2023a). Investor presentations. Retrieved from https://almonty.com/investors/#presentations

^vi British Geological Survey (BGS). (2023). Tungsten fact sheet. Retrieved from https://www.bgs.ac.uk/downloads/start.cfm?id=1408

International Tungsten Industry Association (ITIA). (2023). Tungsten: Global industry, markets & outlook. Retrieved from https://www.itia.info

^vii Almonty Industries Inc. (2023b). SangDong project overview. Retrieved from https://almonty.com/projects/sangdong/

^viii EQ Resources Limited. (2023). Mt Carbine project ASX announcements. Retrieved from https://www.eqresources.com.au

^ix International Tungsten Industry Association (ITIA). (2023). Tungsten: Global industry, markets & outlook. Retrieved from https://www.itia.info

^x British Geological Survey (BGS). (2023). Tungsten fact sheet. Retrieved from https://www.bgs.ac.uk/downloads/start.cfm?id=1408

^xi International Tungsten Industry Association (ITIA). (2023). Tungsten: Global industry, markets & outlook. Retrieved from https://www.itia.info

US Geological Survey (USGS). (2024). Mineral commodity summaries: Tungsten. Retrieved from https://pubs.usgs.gov/periodicals/mcs2024/mcs2024-tungsten.pdf

^xii Almonty Industries Inc. (2023a). Investor presentations. Retrieved from https://almonty.com/investors/#presentations

OECD. (2021). OECD due diligence guidance for responsible supply chains of minerals from conflict-affected and high-risk areas. Retrieved from https://www.oecd.org/corporate/mne/mining.htm

^xiii European Commission. (2020). Critical raw materials for strategic technologies and sectors in the EU: A foresight study. Retrieved from https://ec.europa.eu/docsroom/documents/42849

^xiv Allied Internal Reports. (2024). Allied exploration and grade benchmark updates.

^xv Almonty Industries Inc. (2023a). Investor presentations. Retrieved from https://almonty.com/investors/#presentations

^xvi European Commission. (2023). Critical raw materials act. Retrieved from https://single-market-economy.ec.europa.eu/sectors/raw-materials/critical-raw-materials_en

^xvii International Tungsten Industry Association (ITIA). (2023). Tungsten: Global industry, markets & outlook. Retrieved from https://www.itia.info

To view the source version of this press release, please visit https://www.newsfilecorp.com/release/265023

Apollo Silver Corp. (‘ Apollo ‘ or the ‘ Company ‘) (TSX.V:APGO, OTCQB:APGOF, Frankfurt:6ZF0) is pleased to announce the results of an updated independent Mineral Resource estimate (‘MRE’) for its Calico Silver Project (‘Calico’ or the ‘Calico Project’) located in San Bernardino County, California. Total silver (‘Ag’) Measured & Indicated (‘M&I’) tonnes at the Waterloo property have increased by 61% to a total of 55 million tonnes (‘Mt’) at a grade of 71 grams per tonne (‘gt’) Ag for a total content of 125 million troy ounces (‘Moz’). This represents a 14% increase in Ag ounces compared to the previous MRE (dated March 6, 2023). In addition to updating the gold resource at Waterloo, inaugural barite (‘BaSO4’) and zinc (‘Zn’) resources have been included in both the Indicated and Inferred categories.

News Highlights

• New combined Measured and Indicated total of 55 Mt at a grade of 71 g/t Ag for a total of 125 Moz Ag
  • 61% increase in tonnage and a 14% increase in Ag ounces representing an increase of 15 Moz contained Ag
• Inferred total of 0.6 million tonnes at a grade of 26 g/t Ag for a total of 0.51 Moz contained Ag
• Sensitivity analyses show resiliency of the Ag resource to changes in metal price
• Inaugural BaSO ₄ and Zn resources are estimated as:
  • Indicated: 36 Mt @ 7.4% BaSO ₄ and 0.45% Zn for a total content of 2.7 Mt BaSO ₄ and 354 million pounds (‘Mlbs’) Zn
  • Inferred: 17 Mt @ 3.9% BaSO ₄ and 0.71% Zn for a total content of 0.65 Mt BaSO ₄ and 258 Mlbs Zn
• Gold ounces have increased by 86% in the Inferred category for a new total of 17 Mt at a grade of 0.25 g/t Au and total Au content of 0.13 Moz
• One single pit for all metals at Waterloo deposit with a low strip ratio of 0.8:1
• The increased quantities of Ag and Au, the addition of two new critical minerals, and the larger single pit with low strip ratio has derisked the Calico Project

Further Growth Opportunities

• Silver : There remain further opportunities to expand the Ag mineralization below the base of the 2025 MRE in the northern region of the Waterloo deposit.
• Barite and Zinc : The indicated and inferred mineral resources for BaSO ₄ and Zn show clear potential to be upgraded into M&I via infill drilling and re-assays.
• Gold : Mineralization remains open along strike and at depth. Future work will target additional mineralization along strike with a particular focus on the high-grade structures.
• Langtry Property : Many areas under the Quaternary cover remain untested. In addition, the potential for BaSO ₄ and other metals have not yet been evaluated in detail at Langtry.

Ross McElroy, President and CEO for Apollo, commented: ‘ The Calico Project continues to increase in value, scale and optionality. Already boasting one of the largest undeveloped silver deposits in the US, new data confirms the presence of additional minerals, such as barite and zinc, which are included on the US critical mineral list. These findings will contribute to our project development plans, including an upcoming Preliminary Economic Assessment (PEA). Notably, much of the mineralization occurs at shallow depths, resulting in a low economic strip rate. With a substantial land position, there is strong potential for further discoveries at Calico. ‘

CALICO PROJECT 2025 MINERAL RESOURCE ESTIMATE

The 2025 MRE focused on upgrading and expanding the Waterloo resource estimate from that declared in 2023 (see news release dated March 6, 2023). The most significant change in the 2025 MRE is the addition of BaSO4 and Zn to the Ag and Au mineral resources for the Waterloo deposit and updated mineral resource estimate cut-off (‘COG’) grades for both the Waterloo and Langtry deposits. The Waterloo MRE now contains 125 Moz Ag in 55 Mt at an average grade of 71 g/t Ag in M&I categories, and 0.51 Moz Ag in 0.6 Mt at an average grade of 26 g/t Ag in the Inferred category. The Langtry MRE now contains 57 Moz Ag in 24 Mt at an average grade of 73 g/t Ag in the Inferred category.

In addition to its robust Ag resource, the Waterloo resource now contains 2.7 Mt BaSO4 and 354 Mlbs Zn in 36 Mt at an average grade of 7.4 % BaSO4 and 0.45 % Zn in the Indicated category, and 0.65 Mt BaSO4 and 258 Mlbs Zn in 17 Mt at an average grade of 3.9 % BaSO4 and 0.71 % Zn in the Inferred category. Also, 0.13 Moz oxide Au contained in 17 Mt at an average grade of 0.25 g/t Au in the Inferred category. Oxide Au mineralization has been drilled over 1,000 m strike length and remains open in multiple directions. Figures 1 and 2 present the mineral resource block model grade and classification for each of the metals, respectively.

Mineralization at Waterloo and Langtry is shallow and shows high continuity along the 1.8 km long strike length at Waterloo and 1.25 km at Langtry of the deposit. The 2025 MRE is calculated to a maximum open pit depth of approximately 192 m (630 ft) at Waterloo and approximately 149 m (490 ft) at Langtry for all metals. An open pit optimization is used to determine reasonable prospects for economic extraction, the calculated waste to mineralization tonnage ratio for the total resource at Waterloo is 0.8:1and 2.8:1 at Langtry.

Table 1: Calico Project 2025 MRE. Effective June 30, 2025.

• Ounces reported as troy ounces.
• Base-case resource estimate reported in Table 1 using 47 g/t Ag equivalent (‘AgEQ’) and 0.17 g/t Au cut-off grades for Waterloo and 43 g/t Ag for Langtry.
• CIM definitions are followed for classification of the mineral resource.
• For the Waterloo Property, a AgEQ cut-off grade was calculated using the following variables: surface mining operating costs (US$2.8/st), processing costs plus general and administrative cost (US$26.5/st), Ag price (US$28/oz), BaSO ₄ price (US$120/t), Zn price (US$1.22/lb), Au price (US$2,451/oz), and metal recoveries (Ag 65%, Au 80%, BaSO ₄ 85%, Zn 80%). For the Waterloo Property gold-only resources the Au cut-off grade was calculated using above Au price, Au recovery and gold-only processing costs plus general and administrative cost (US$8.2/st).
• For the Langtry Property, a silver-only equivalent cut-off grade was calculated using above Ag price, Ag recovery and silver-only processing costs plus general and administrative cost (US$24/st).
• Resources reported in Table 1 are constrained to within a conceptual economic pit shell targeting mineralized blocks within the specified cutoff grade limits shown in the table. Specific gravity for the mineralized zone is fixed at 2.44 t/m ³ (13.13 ft ³ /st). For the Waterloo Property only the following drillhole grades were capped prior to estimation: Ag 450 g/t, Au 2 g/t, Ba 31% and Zn 7%.
• Totals may not represent the sum of the parts due to rounding.
• ^1,2 The 2025 MRE has been prepared by Derek Loveday, P. Geo., of Stantec Consulting Services Ltd., an independent Qualified Person, in co-operation with Mariea Kartick, P.Geo. (independent Qualified Person for drilling data QA/QC) and Johnny Marke P.G. (independent Qualified Person for resource estimation). The 2025 MRE was produced in conformance with NI 43-101. Mineral resources are not mineral reserves and do not have demonstrated economic viability. There is no certainty that any mineral resource will be converted into a mineral reserve.
• No drilling was completed on the Waterloo Property and Langtry Property since the declaration of the 2023 MRE for Waterloo and 2022 MRE for Langtry. The 2025 MRE update accounts for changes in commodity prices, mining costs since 2022/2023, and barite testing of existing drill samples from the Waterloo Property.

Figure 1: Calico Project, 2025 Mineral Resource Block Model Grade

Figure 2: Calico Project, 2025 Mineral Resource Classification

Data Input

The 2025 MRE considered drilling information up to and including the most recently completed program in 2022, as well as geological information from Apollo’s 2021, 2022 and 2025 exploration activities. Drilling data supporting the 2025 MRE includes information from historic drilling data from 258 holes (18,679 m/61,282 ft), and 2022 drilling data from 85 holes (9,729 m/31,918 ft) for a total of 343 holes (28,407 m/93,199 ft). Nominal drill hole spacing is 30 x 46 m (100 x 150 ft) within the Measured portion of the 2025 MRE. Of the drill data set used, 332 holes are rotary or reverse circulation holes, and 11 holes are diamond drill holes.

For the 2025 MRE, additional re-assaying of 7,431 historical and recent drill pulps by X-Ray Fluorescence for barium (‘Ba’) and barium oxide (‘BaO)’) was completed or a total of 7,893 Ba samples used for estimation. The Ba as well as existing Zn assay (4-acid or aqua-regia) assay results were subject to a comprehensive quality assurance/quality control (‘QAQC’) program that was reviewed by Mariea Kartick, P.Geo. (Stantec), an independent ‘Qualified Person’ (or ‘QP’) as such term is defined within National Instrument 43-101 – Standards of Disclosure for Mineral Projects (‘NI 43-101’). In addition, detailed surface mapping and rock sampling were completed in the Burcham area of the Waterloo Property. The mapping and sampling provided a better understanding of the extent of the Au mineralization at surface and within the Pickhandle Formation as well as helped refine orientations of high-angle gold-bearing structures in the geologic model.

No additional Ag and Au assay data was used for the 2025 MRE from that acquired for the 2023 MRE. Material changes in Ag and Au resource in the 2025 MRE from the 2023 MRE are due to changing economics from 2023 to 2025 and inclusion of BaSO4 and Zn in the overall resource for the Waterloo deposit. Verification of drilling exploration data used for the 2025 MRE was performed by Mariea Kartick, P.Geo. (Stantec), an independent QP.

Cut-Off Grade and Reasonable Prospects for Eventual Economic Extraction

For the Waterloo MRE two base-case cut-off grades are used. A silver equivalent (‘AgEQ’) cut-off grade of 47 g/t was calculated for a combined recovery of Ag, BaSO4, Zn and Au and where the combined mineralization of these metals was less than AgEQ COG, gold-only recovery were evaluated for a Au COG grade of 0.17 g/t. For Langtry silver-only recovery is considered for a lower Ag COG grade of 43 g/t. The above cut-off grades were determined using the following assumptions:

• Silver price of US$28 per troy ounce, gold price of US$2,451 per troy ounce, barite price of US$120 per mt and zinc price of US$ 1.22 per pound
• Combined metal (Ag, BaSO ₄ , Zn, Au) processing costs of US$26.5 per short ton;
• Gold only processing cost of US$8.2 per short ton
• Silver only processing cost of US$24 per short ton
• Included in all processing costs are general and administrative costs of US$3 per short ton;
• Mining costs of US$2.8 per short ton; and
• Silver recovery of 65%, BaSO ₄ recovery of 85%, Zn recovery of 80% and Au recovery of 80%.

Metal recoveries are based on results from the 2022 Metallurgical Test Program (see news releases dated February 14, 2023, February 23, 2023 and May 2, 2023) and published recoveries for comparative operations. Silver, Zn and Au prices were calculated by averaging published monthly commodity prices from the last 24 months up to June 2025 based on data from the World Bank. Barite price was based on historical BaSO4 pricing trends from 2013 to 2023, the last year when publicly available barite pricing data was available. Changes in metal prices, optimized processing parameters and/or improved metal recoveries will all impact cut-off grade and any resultant MRE.

Reasonable prospects for eventual economic extraction were assessed by calculating recovered block revenues for silver grade blocks above cut-off grade, less surface mining costs, and generating an optimized Hexagon© MinePlan Pseudoflow economic pit shell at constant slope of 45 degrees that is constrained to within the property claim boundaries.

Sensitivity Analysis

A sensitivity analysis was undertaken to examine the impacts of varying the cut-off grades for AgEQ grades and tonnes for the Waterloo deposit within the base case economic pit shell and for Ag only grades and tonnes in the Langtry deposit. The available tonnes and average grade for each COG from within the 2025 MRE economic pit shell is shown in Table 2 for Waterloo and in Table 3 for Langtry.

Table 2: Sensitivity analysis of the grade and tonnage relationships at varying pit-constrained silver equivalent cut-off grades for the Waterloo Property. Effective June 30, 2025.

Table 3: Sensitivity analysis of the grade and tonnage relationships at varying pit-constrained silver equivalent cut-off grades for the Langtry Property. Effective June 30, 2025.

Resource Estimation Methodology

The 2025 MRE was prepared in accordance with the requirements of NI 43-101 and applicable guidelines disseminated by CIM. Mineral Resources that are not Mineral Reserves do not have demonstrated economic viability. The quantity and grade of reported Inferred resources are uncertain in nature as there has been insufficient exploration to define these Inferred Resources as Indicated or Measured.

The 2025 MRE resource block model was oriented along regional strike of mineralization controlling range front fault (Calico fault) and bedding, at approximately 045 degrees. Metal grades were estimated using ordinary kriging into a 20 ft x 20 ft x 10 ft block model using 5 ft drill hole composites and a bulk density of 2.44 t/m ³ (13.13 ft ³ /st). The block models are constrained to the west by the Calico range front fault and to the east by the contact between the mineralized Barstow formation sedimentary rocks and the Pickhandle formation rhyolitic rocks. Both structures are mineralization controlling features. A grade capping evaluation was performed, and for the Waterloo Property only the following drillhole grades were capped prior to estimation: Ag 450 g/t, Au 2 g/t, Ba 31% and Zn 7%. No grade capping was deemed necessary for the Langtry Property.

The MRE was internally audited, and peer reviewed by Stantec prior to being released to the Company and being declared final. Further, the Company completed an internal review of the 2025 MRE data supplied by Stantec. A full description of the data and the data verification process will be detailed in the technical report associated with the 2025 MRE, which will be prepared in accordance with NI 43-101 Standards of Disclosure for Mineral Projects and filed within 45 days of this news release on the Company’s website and on SEDAR+ at www.sedarplus.ca .

SAMPLING AND QUALITY ASSURANCE/QUALITY CONTROL

Additional sampling since the 2023 MRE and prior to the 2025 MRE included re-assaying of 7,797 drill pulps (primary plus QAQC) by X-Ray Fluorescence for Ba and BaO at ALS in Reno, Nevada and a metallurgical testing program for barite from five PQ drill core composites was completed at McClelland Laboratories Inc., in Sparks, Nevada. Results from the metallurgical test were presented in a prior News Release (May 2, 2023).

Pulps from historical and the 2022 drill program were submitted to ALS Reno for sample preparation and Ba analysis. Historical pulps were homogenized by light pulverizing (HOM-01) and the pulverisers were washed between samples (WSH22). After preparation, splits of prepared pulps are securely shipped to ALS Vancouver, British Columbia for analysis. Most of the pulps were analyzed using X-Ray Fluorescence Spectroscopy (‘XRF’) methods ME-XRF10, with the exception of a few samples that were analysed with ME-XRF15c (samples with high sulphide content) or ME-XRF26 (selected samples for a more complete suite of elements). The detection limits for Ba with ME-XRF10 is between 0.01 and 45%, between 0.01 and 50% with ME-XRF15C and for BaO with ME-XRF26 0.01-66%. All analyses were completed at ALS Vancouver.

The Company maintains its own comprehensive quality assurance and quality control (QA/QC’) program to ensure best practices in sample preparation and analysis for samples. The QA/QC program includes the insertion and analysis of certified reference materials, commercial pulp blanks, preparation blanks, and field duplicates to the laboratories. Apollo’s QA/QC program includes ongoing auditing of all laboratory results from the laboratories. The Company’s Qualified Person is of the opinion that the sample preparation, analytical, and security procedures followed are sufficient and reliable. The Company is not aware of any drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of the data reported herein.

ABOUT THE PROJECT

Location

The Calico Project is located in San Bernardino County, California and comprises the adjacent Waterloo, Langtry, and Mule properties which total 8,283 acres. The Calico Project is 15 km (9 miles) from the city of Barstow, 5 km (3 miles) from commercial electric power and has an extensive private gravel road network spanning the property.

Geology and Mineralization

The Calico Project is situated in the southern Calico Mountains of the Mojave Desert, in the south-western region of the Basin and Range tectonic province. This 15 km (9 mile) long northwest-southeast trending mountain range is dominantly composed of Tertiary (Miocene) volcanics, volcaniclastics, sedimentary rocks and dacitic intrusions. Mineralization at Calico comprises high-level low-sulfidation silver-dominant epithermal vein-type, stockwork-type and disseminated-style associated with northwest-trending faults and fracture zones and mid-Tertiary (~19-17 Ma) volcanic activity. Calico represents a district-scale mineral system endowment with approximately 6,000 m (19,685 ft) in mineralized strike length controlled by the Company. Silver and gold mineralization are oxidized and hosted within the sedimentary Barstow Formation and the upper volcaniclastic units of the Pickhandle formation along the contact between these units.

The 2025 MRE for Waterloo Property comprises 125 Moz Ag in 55 Mt at an average grade of 71 g/t Ag (M&I categories), 0.51 Moz Ag in 0.60 Mt at an average grade of 26 g/t Ag (Inferred category), 130,000 oz gold in 17 Mt at an average grade of 0.25 g/t gold (Inferred category), 2.7 Mt BaSO4 and 354 Mlbs Zn in 36 Mt at an average grade of 7.4 % BaSO4 and 0.45 % Zn (Indicated category), and 0.65 Mt BaSO4 and 258 Mlbs Zn in 17 Mt at an average grade of 3.9 % BaSO4 and 0.71 % Zn (Inferred category). The 2025 MRE for Langtry property comprises 57 Moz Ag in 24 Mt at an average grade of 73 g/t Ag (Inferred category).

QUALIFIED PERSONS

The scientific and technical data contained in this news release was reviewed, and approved by Derek Loveday, P. Geo., Johnny Marke P.G. and Mariea Kartick, P.Geo., from Stantec and are Qualified Persons independent of the Company. Mr. Loveday is a registered Professional Geoscientist in Alberta, Canada, and Mr. Marke is a registered Professional Geologist in Oregon, USA and both are responsible for the mineral resource estimation. Ms. Kartick is a registered Professional Geoscientist in Ontario, Canada and is responsible for data QA/QC.

This news release has also been reviewed and approved by Isabelle Lépine, M.Sc., P.Geo., Apollo’s Director of Mineral Resources. Ms. Lépine is a registered Professional Geoscientist in British Columbia, Canada and is not independent of the Company.

ABOUT Apollo Silver Corp.

Apollo Silver is advancing one of the largest undeveloped primary silver projects in the US. The Calico Project hosts a large, bulk minable silver deposit with significant barite credits – a critical mineral essential to the US energy and medical sectors. The Company also holds an option on the Cinco de Mayo Project in Chihuahua, Mexico, which is host to a major carbonate replacement (CRD) deposit that is both high-grade and large tonnage. Led by an experienced and award-winning management team, Apollo is well positioned to advance the assets and deliver value through exploration and development.

Please visit www.apollosilver.com for further information.

ON BEHALF OF THE BOARD OF DIRECTORS

Ross McElroy
President and CEO

For further information, please contact:

Email: info@apollosilver.com

Telephone: +1 (604) 428-6128

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release includes ‘forward-looking statements’ and ‘forward-looking information’ within the meaning of Canadian securities legislation. All statements included in this news release, other than statements of historical fact, are forward-looking statements including, without limitation, statements with respect to the potential of the Calico Project and its overall investment attractiveness; the expectation that the Calico Project will continue to increase in value, scale and optionality; the potential economic significance of the updated mineral resource estimate, including the newly defined barite and zinc resources in addition to silver and gold; the potential recovery rates; the potential to further expand the resource estimate and upgrade its confidence level, including prospective silver, gold, barite and zinc mineralization on strike and at depth; the potential impact of barite and zinc being designated as critical minerals in the United States; assumptions regarding mineralization at shallow depths and strip ratios; timing and execution of future planned drilling, exploration, preliminary engineering and additional metallurgical activities; timing of commencement and completion of a preliminary economic assessment or other technical studies; the potential for additional discoveries and overall project development; and the Company’s ability to advance, develop, and permit the Calico Project. Forward-looking statements include predictions, projections and forecasts and are often, but not always, identified by the use of words such as ‘anticipate’, ‘believe’, ‘plan’, ‘estimate’, ‘expect’, ‘potential’, ‘target’, ‘budget’ and ‘intend’ and statements that an event or result ‘may’, ‘will’, ‘should’, ‘could’ or ‘might’ occur or be achieved and other similar expressions and includes the negatives thereof.

Forward-looking statements are based on the reasonable assumptions, estimates, analysis, and opinions of the management of the Company made in light of its experience and its perception of trends, current conditions and expected developments, as well as other factors that management of the Company believes to be relevant and reasonable in the circumstances at the date that such statements are made. Forward-looking information is based on reasonable assumptions that have been made by the Company as at the date of such information and is subject to known and unknown risks, uncertainties and other factors that may have caused actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking information, including but not limited to: risks associated with mineral exploration and development; metal and mineral prices; availability of capital; accuracy of the Company’s projections and estimates; realization of mineral resource estimates, interest and exchange rates; competition; stock price fluctuations; availability of drilling equipment and access; actual results of current exploration activities; government regulation; political or economic developments; environmental risks; insurance risks; capital expenditures; operating or technical difficulties in connection with development activities; personnel relations; and changes in Calico Project parameters as plans continue to be refined. Forward-looking statements are based on assumptions management believes to be reasonable, including but not limited to the price of silver, gold zinc and barite; the demand for silver, gold, zinc and barite; the ability to carry on exploration and development activities; the timely receipt of any required approvals; the ability to obtain qualified personnel, equipment and services in a timely and cost-efficient manner; the ability to operate in a safe, efficient and effective matter; and the regulatory framework regarding environmental matters, and such other assumptions and factors as set out herein. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that forward-looking statements will prove to be accurate and actual results, and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward looking information contained herein, except in accordance with applicable securities laws. The forward-looking information contained herein is presented for the purpose of assisting investors in understanding the Company’s expected financial and operational performance and the Company’s plans and objectives and may not be appropriate for other purposes. The Company does not undertake to update any forward-looking information, except in accordance with applicable securities laws .

Photos accompanying this announcement are available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/cce62828-4cf5-487a-b245-9c271e6dfdcf

https://www.globenewswire.com/NewsRoom/AttachmentNg/be15e1d9-2d79-4446-b086-ed7daefdb013